Licensed, factory-trained technicians. Same-day service when available.Call (630) 657-0334
  1. Home
  2. Services
  3. Washing Machine Repair
  4. Plainfield, IL

Washing Machine Repair in Plainfield, IL

Premium Appliance Repair fixes washing machines in Plainfield, IL, with licensed, factory-trained technicians for front load and top load washers. We repair leaks, drain failures, spin problems and heavy vibration, and you approve the cost before work starts.

  • Licensed, factory-trained
  • Same-day when available
  • 20+ years of experience
Washing Machine Repair in Plainfield, IL by Premium Appliance Repair

Washing Machine Repair in Plainfield

Washing Machine Repair for Plainfield homes

In a lot of newer Plainfield homes the laundry room is upstairs, steps from the bedrooms. That is convenient until the washer leaks or starts walking across the floor. A drip that would be a nuisance in a basement can reach a ceiling below, and a machine that shakes on an upper floor is felt through the house. Washer problems here deserve a quick response.

We repair top load, front load, high-efficiency and stacked washers from Whirlpool, Maytag, Kenmore, GE, Amana, Roper, Speed Queen, Frigidaire, Electrolux, LG and Samsung. Common repairs include drain pumps, door boot seals, lid switches and door locks, water inlet valves, drive belts, motor couplings, suspension rods, shock absorbers and control boards. If the tub bearings are failing, we will explain what that repair involves so you can weigh it.

Call us or submit an online request to get on the schedule, with same-day service when available. The technician runs the washer through fill, wash, drain and spin, finds where the fault is, and gives you the cost before repairing it. Many washer parts are stocked on the truck. Before leaving, we run a test cycle and check for leaks around the machine.

Schedule Washing Machine Repair

Send your details and our office will call to confirm your Plainfield appointment.

Prefer to talk? Call (630) 657-0334, Monday to Friday 7am to 7pm and Saturday and Sunday 8am to 5pm.

Warning signs

Signs your Plainfield washer needs repair

  • Clothes come out dripping because the final spin never happened
  • A wet patch spreads from under the front of the machine
  • The washer bangs or thumps hard enough to shake the floor
  • The tub fills with water and then just sits there
  • A burning rubber smell appears during the spin
  • The door stays locked with a load trapped inside

Before you call

Before you call about your washer

  • Redistribute a heavy or lopsided load, such as towels or bedding, and try the spin again.
  • Check that both water supply valves behind the washer are fully open.
  • Make sure the drain hose is not kinked or pushed too far down the standpipe.
  • Press on each corner of the washer to see whether it rocks and needs leveling.

Still not right? Request washing machine repair in Plainfield and we will take it from there.

What we fix

Washing machine repairs we carry out in Plainfield laundry rooms

Drain pump

Socks, coins and hair ties collect in the pump and stall it. The tub stays full and the cycle stops before the spin. We clear the pump and filter, test the motor and replace it if it has burned out.

Lid switch or door lock

The washer will not spin unless it knows the lid or door is secured. A failed lock leaves a flashing light and a wet load. The technician tests the lock and its wiring, then installs a new assembly.

Drive belt or motor coupling

These link the motor to the drum or transmission. When one snaps, the motor runs but nothing turns, sometimes with a burning rubber smell. We replace the worn part and inspect the pulley.

Suspension rods and shocks

Rods on top-loaders and shocks on front-loaders steady the tub. Once they weaken, the washer bangs and walks during spin. We replace them as a full set and level the cabinet.

Water inlet valve

Hot and cold solenoids open to fill the tub. A failing valve fills slowly, fills with the wrong temperature or drips into the drum when off. We clean the inlet screens and replace the valve.

Tub bearings and seal

A roar that builds with spin speed points to worn bearings, usually after the seal lets water through. It is a large repair. We confirm it, then explain whether it is worth doing on your machine.

How it works

Washing Machine Repair in Plainfield in 3 simple steps

  1. Call or book online

    Tell us the appliance, the brand and what it is doing.

  2. We diagnose on site

    A licensed, factory-trained technician finds the cause and explains the cost first.

  3. Repaired and tested

    We carry the most common parts, so many jobs are done in one visit.

Models we service

Washer types we service

Top-load agitator washers

The traditional design uses a center post and a transmission or gearcase. Repairs tend to be mechanical, such as couplings, belts, agitator parts and lid switches.

High-efficiency top-loaders

These use a low wash plate and little water, and they sense load size before filling. Balance errors and suspension wear are the usual complaints we diagnose.

Front-load washers

A door boot seal, a drain filter and shocks set this style apart. We check the boot for tears and trapped items, a common source of leaks and odors.

Stacked and second-floor installs

Stacked pairs and upstairs laundry closets, common in newer Plainfield homes, leave little working room. We also check hoses and the drain pan, since a leak upstairs travels down.

Your appointment

How to get ready for a washer repair visit

  • Take laundry out of the drum if you can, even if the clothes are still wet.
  • Clear baskets, detergent and shelving from around the washer so it can be pulled forward.
  • Know where the hot and cold shutoff valves are, and close them if the washer leaks.
  • Tell us the point in the cycle where it stops, such as fill, wash, drain or spin.

Not sure where the model number is? Use our model number finder.

Repair or replace

Fix or replace? A washing machine guide for Plainfield households

Most washing machines last 10 to 13 years. In a Plainfield home with a full household, a washer may run a load or more every day, so wear arrives on schedule. Pumps, door locks, belts, valves and suspension parts are all reasonable repairs on a machine under about 10 years old. If the drum turns smoothly and quietly by hand and the cabinet is free of rust, fixing it normally gives you several more years.

Think about replacing when the 50% rule comes into play. If the repair would exceed half the price of a similar new washer and the machine is past 10 years, a new one is generally the sounder choice. Failed tub bearings or a bad transmission on an older unit are the classic cases. With laundry on the second floor, an aging washer that leaks is a bigger risk, and we factor that into our advice.

For a quick read on your own numbers, try the repair or replace calculator or see what sets the cost of a repair.

Local service

Second-floor laundry and washer repair in Plainfield

A washer on an upper floor raises the stakes on 2 common faults. The first is leaking, whether from a split door boot, a loose hose or a worn pump seal. The second is vibration from tired suspension parts or a machine that has slipped out of level. Caught early, both are routine repairs. Left alone, they are the ones that lead to trouble beyond the laundry room.

Many Plainfield washers date from when the homes were new in the late 1990s and 2000s, so 15 to 25 years of loads is not unusual. We serve homeowners, tenants, landlords and property managers in 60544, 60585 and 60586. If your washer sits in an upstairs closet or a tight laundry room, mention it when you book so the technician plans for access.

See all appliance repair in Plainfield or our full washing machine repair service. You can also see our Plainfield Google Business Profile.

Book Washing Machine Repair

Real jobs, real homes

Recent repairs in Plainfield

LG stacked washer and dryer repair in Plainfield, IL by Premium Appliance Repair
LG stacked washer and dryer repair in Plainfield, IL

Quick answers

Washing Machine Repair questions in Plainfield, answered

Who repairs washing machines in Plainfield, IL?

Premium Appliance Repair repairs washing machines in Plainfield, IL. Licensed, factory-trained technicians fix front load, top load and stacked washers from all major brands and explain the cost before any repair begins.

Why does my washer shake so much on the second floor?

A washer shakes when a load is unbalanced, the feet are out of level, or the suspension rods or shock absorbers are worn. On a Plainfield second floor the movement feels stronger. A technician can level the machine and replace worn parts.

My washing machine is leaking upstairs in my Plainfield home. What should I do?

Stop the cycle, turn off both water supply valves behind the washer and mop up the water. Do not run it again. Then schedule a repair so a Plainfield technician can find the leaking hose, seal, boot or pump.

Why will my washer not drain or spin?

A washer that will not drain or spin often has a clogged or failed drain pump, a kinked drain hose, a faulty lid switch or door lock, or a worn belt. A technician in Plainfield can test each part during the visit.

Do you repair front load and top load washers in Plainfield?

Yes. We repair front load, top load, high-efficiency and stacked laundry units in Plainfield, including Whirlpool, Maytag, Kenmore, GE, Speed Queen, LG and Samsung. Have the model number ready when you call.

Schedule washing machine repair in Plainfield today

Call our office Monday to Friday 7am to 7pm and Saturday and Sunday 8am to 5pm, or request an appointment online at any time. Same-day service when available.

Call Now Schedule Repair