Licensed, factory-trained technicians. Same-day service when available.Call (630) 657-0334
  1. Home
  2. Blog
  3. Washer Not Draining or Spinning in Bolingbrook? Causes and Fixes

Local Guides

Washer Not Draining or Spinning in Bolingbrook? Causes and Fixes

Side angle of an open white GE front-load washing machine showing the blue door seal gasket and stainless steel drum in a laundry space.

Quick answer: A washing machine that will not drain or spin usually has a clogged drain pump, a kinked drain hose, a failed lid switch or door lock, a worn drive belt, or an unbalanced load. Check the hose and rebalance the load first. If water is still standing in the drum, the pump or lock needs to be tested by a technician.

Few things stop a household faster than opening the washer and finding a drum full of gray water. In busy Bolingbrook homes where the washer runs most days of the week, drain and spin problems are the laundry repair we see most. Here is how to narrow it down before you schedule appliance repair in Bolingbrook.

The 5 most common causes

1. A clogged drain pump

Socks, coins, hair ties and pet hair collect in the pump filter. Many front-load washers have a small access door at the bottom front where you can drain and clean this filter. Top-load pumps usually need a technician to reach.

2. A kinked or clogged drain hose

Pull the washer forward a few inches and look for a pinched hose. The hose should also sit no more than about 4 to 6 inches into the standpipe, or it can siphon and confuse the machine.

3. A failed lid switch or door lock

The washer will not spin if it believes the lid or door is open. If you do not hear the lock click at the start of the cycle, this is a likely suspect.

4. A worn belt or motor coupling

On belt-drive machines, a stretched or broken belt lets the motor run while the drum sits still. You may notice a burning rubber smell.

5. An unbalanced or oversized load

One heavy comforter or a single bath mat can throw the drum off balance. Modern washers will stop the spin to protect themselves.

What you can safely try

  • Redistribute the load and run a Drain and Spin cycle
  • Straighten the drain hose and confirm it is not pushed too deep into the standpipe
  • Clean the pump filter if your model has an access door, with towels and a shallow pan ready
  • Unplug the washer for 5 minutes to reset the control board

When to stop and call

Stop and call if water is leaking onto the floor, the washer trips the breaker, you smell burning, or the drum will not turn by hand. Running repeated cycles on a failing pump or motor can turn a modest repair into a larger one. Our technicians handle washing machine repair on top-load and front-load models from Whirlpool, Maytag, LG, Samsung, GE, Speed Queen and more.

Laundry repair for Bolingbrook homes and rentals

We work with homeowners, tenants, landlords and property managers across Bolingbrook, from single-family homes to townhomes with second-floor laundry, where a leak can damage the ceiling below. Call (630) 657-0334 Monday to Friday 7am to 7pm and Saturday and Sunday 8am to 5pm, or request a visit online at any time.

Need appliance repair in Bolingbrook, IL?

See local service details, recent jobs and reviews, then book a licensed, factory-trained technician. Same-day service when available.

Premium Appliance Repair logo

Written by the Premium Appliance Repair team. Licensed, factory-trained technicians with 20+ years of experience repairing appliances across the Chicago suburbs. Questions about this article? Call (630) 657-0334. Read our editorial policy.

Back to all appliance repair articles

Local questions

Bolingbrook washing machine questions, answered

Why is my washing machine full of water after the cycle?

Standing water almost always means a clogged drain pump or filter, a kinked drain hose, or a failed pump motor. If cleaning the filter and straightening the hose does not help, the pump needs to be tested.

Who repairs washing machines in Bolingbrook, IL?

Premium Appliance Repair repairs top-load and front-load washing machines in Bolingbrook with licensed, factory-trained technicians. Call (630) 657-0334 or book online.

Is it worth repairing a washer that will not spin?

Often, yes. Lid switches, door locks, belts and drain pumps are common repairs that cost far less than a new washer. A technician can tell you on site whether the repair makes sense for the age of your machine.

Can I use my washer if it is leaking a little?

No. Even a small leak can damage flooring and subfloor, and water near electrical parts is a safety risk. Turn off the water supply valves and schedule a repair.

Why will my washing machine not spin or drain?

The most common causes are a clogged drain pump or hose, a worn drive belt, a failed lid switch or door lock, or an unbalanced load. If the washer is full of water, the drain pump is the first thing to check. A technician can confirm the failed part quickly.

Why is my washer leaking?

Leaks usually come from loose or cracked fill and drain hoses, a worn door boot seal on front-load models, a failed water inlet valve, a leaking pump, or too much detergent. Turn off the water supply valves and schedule a repair to prevent floor damage.

Do you repair front-load and top-load washers?

Yes. We repair front-load, top-load, high-efficiency and stacked units from LG, Samsung, Whirlpool, Maytag, GE, Kenmore, Electrolux, Speed Queen and more.

Do you offer washing machine maintenance?

Yes. We provide scheduled preventative maintenance for washing machines. It is a smart choice for busy households and for landlords who want to prevent mid-lease breakdowns.

How much does washing machine repair cost?

Drain pumps, lid switches, belts and inlet valves are common, affordable repairs. Bearings and control boards cost more. We explain the cost before work begins.

Why does my washing machine smell like mold?

Moisture and detergent residue in the door gasket, dispenser and drum cause the odor. Wipe the gasket, run a hot cleaning cycle and leave the door open between loads.

Need an appliance repaired today?

Call our office Monday to Friday 7am to 7pm and Saturday and Sunday 8am to 5pm, or request an appointment online at any time. Same-day service when available.

Call Now Schedule Repair